This fountain includes interchangeable
nozzles offering 6 different display patterns, allowing you to change
the look of the fountains in minutes. 1 HP (two pump) units are
available for 110V and 220V service. High-output pump assemblies
with high-impact housings and water-cooled stainless steel motors built
for continuous service. Unlike adding horse power, adding pumps
significantly increases volume. Traditionally, increasing a pump by 1/2
HP would add 25-30 gallons per minute (GPM). However, the MPS fountains
increase the volume by 70 GPM with each additional pump! The larger
volumes of water provide dramatic displays of more than 20 feet in
height!
36" FLOAT
- Includes molded brass inserts for attaching a light kit and
tapered design for low visibility from shore.
100' OF POWER CORD
- Non-wicking; additional lengths available up to 200'.
MPS FLOW SYSTEM
- Allows the pumps to work in tandem for impressive displays.
SIX NOZZLE PATTERNS
- Includes the Three tiered, Two tiered, 45 degree and 32 degree
Wide V and Center Geyser V (adjustable), ranging in heights from
10-20' and 3-25' wide.
TIMER/CONTROLLER
(optional) - Our outdoor timer can be set to turn
fountain on and off at intervals.
LIGHTS
(optional) - Our 3-light sets are available to beautify
the fountain at dark. The lights include a 200w transformer with
built-in timer, powered separately from the pump.
FILTERS
– Keep debris from the pump intakes.
2 YEAR LIMITED WARRANTY
This MPS Series 1 HP, 110V package offers
you years of proven reliability, beautiful fountain displays, and the
versatility to enjoy 24 hours a day. Our energy efficient, 110volt,
high-output pump assemblies with high-impact housings and water-cooled
stainless steel motors are built for continuous duty. The pumps deliver
8,000gph (130gpm) yet operate at 1100 watts, keeping operating costs at
a minimum.
This package is partially assembled for
convenience and quick installation.
The MPS Series 1 HP 110V system is
equipped with the following components:
Two of our 1/2 hp, 110 volt,
high-output pumps with high-impact housing and water-cooled
stainless steel motors built for continuous duty
36" UV resistant float, includes
molded brass inserts for attaching our light kits, and tapered
design for low visibility
100' of non-wicking power cord
with plug end. Additional lengths available up to 200’
Patented MPS flow system*
High impact pump filters
Muskrat/Varmint Protection
One Year Limited Warranty
A minimum depth of 18" to 24" is required for effectiveness
1 HP
Floating Pond Fountain w/GFCI protection
(Includes float, pump, 6-pattern nozzle, 100'
cable, GFCI plug: $1099.00
1 HP Floating Pond Fountain w/GFCI and
timer (Includes float, pump, 6-pattern nozzle, 100'
cable, GFCI timer: $1179.00
1 HP Floating Pond Fountain w/GFCI,Timer,
3-Light Kit w/transformer (Includes float, pump,
6-pattern nozzle, 100'
cable, GFCI timer, 3-light kit w/3 clear bulbs and
transformer w/timer:
$1639.00
Filter (set of 2)
A filter is a necessity for ponds with floating
debris. The filter increases the surface area around the
floating fountain pump from which to draw water, which,
in turn reduces your need to clean the filter and
nozzle. $59.00
Light Kit
These durable aluminum low-voltage
three-light kits can easily be installed. They attach to
the float directly and sit just below the water in order
to conceal the fixture. These lights are designed for
high-light output and the 50-watt halogen bulbs will
fully illuminate the fountain sprays. The lights connect
to our 300 watt Malibu transformer that has a built in
timer and comes with 100' cable. $479.00
