Sewage Pumps and Grinder Pumps
For Sewage and
wastewater applications, with more than 30 years experience in
manufacturing water pumps, including sump pumps, effluent pumps,
grinder pumps and mag drive fountain pumps. We have a wide range
of sizes available. 1 year Warranty!
Important tips
- The Length of the horizontal pipe is also an important
factor when choosing a sewage or grinder pump. Every 10’
of pipe equals the same restrictions as 1’ of lift. The
shut off
means that is the maximum height that the sewage or
grinder pump will lift. So you will get "0" flow at the
shut off height.
50WQ
Submersible Sewage Pump
Applications:
|
---
Non-clogging submersible sewage pump |
|
---
For installation in small lift stations,
drainage system or raw water application |
Made
specifically for:
|
--
Home and farms |
|
--
Mobile home parks and motels |
|
--
School and hospital |
|
--
Municipal package systems |
|
--
Industrial treatment systems |
|
--
Dewatering application |
|
Specification:
| |
|
|
|
Speed: 3450RPM
(nominal) |
|
Solids Handling: 1-1/2"Max |
|
Capacities: up to 150GPM,
|
|
Total heads: up to 33ft. |
|
Discharge: 2" NPT, Vertical |
|
Ambient Temp: 104F (40C)
Continuous 140F (60C)
Intermittent |
|
Max. Start/Stop times per hour:
15 |
|
VOLUTE: Cast Iron, ASTM A-48
Class 30. |
|
MOTOR HOUSING: Cast Iron,
ASTM A-48 Class 30. |
|
SEAL PLATE: Cast Iron ASTM
A-48 Class 30. |
|
IMPELLER: Vortex Design,
Cast Iron, ASTM A-48 Class 30.
Balanced for smooth operation.
|
|
SHAFT: Corrosion
resistance stainless steel,
Threaded design. |
|
O-RING: BUNA-N, assures
positive sealing against oil
leakage. |
|
HARDWARE: 300 series
stainless steel. |
|
DUAL MECHANICAL SEALS: 300 S.S.
metal parts, BUNA-N elastomers.
|
|
UPPER SEAL: Carbon
(rotary) VS Ceramic (stationary)
|
|
LOWER SEAL: Silicon
Carbide VS Silicon Carbide. |
|
INSULATION: Class B |
|
CABLE: Water proof 20 ft.
Cord (Plug on 115V). |
|
ENTRY: Pressure grommet
for sealing and strain relief. |
|
MOTOR: Squirrel Cage
Induction, Single Phase, 2
Poles, Air filled, 115V/60Hz,
1/3Hp~1Hp, Permanent Split
Capacitor Type, Built-in Thermal
Protector, with automatic reset. |
|
OPTIONAL:
Piggy back
ball float switch
/ 115v.
Only 28.00 |
|
|
Specification:
|
Model |
V. |
Motor full load |
HP |
GPM at height (ft) |
Shut Off (ft.) |
Solids(in.) |
Cord size |
WtLbs |
Price |
|
5 |
10 |
15 |
20 |
25 |
30 |
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
16/3 |
|
|
|
50WQ0.37-2P |
115 |
6.5 |
1/2 |
110 |
90 |
65 |
35 |
|
|
24 |
55 |
219.00 |
|
50WQ0.55-2P |
115 |
7.5 |
3/4 |
140 |
125 |
105 |
80 |
35 |
|
26 |
60 |
249.00 |
|
50WQ0.75-2P |
115 |
8.5 |
1 |
150 |
135 |
125 |
110 |
85 |
50 |
33 |
65 |
289.00 |
|
|
|
|
80WQ
Submersible Sewage Pump
Applications:
|
---
Non-clogging submersible sewage pump |
|
---
For installation in small lift stations,
drainage system or raw water application |
Made
specifically for:
|
--
Home and farms |
|
--
Mobile home parks and motels |
|
--
School and hospital |
|
--
Municipal package systems |
|
--
Industrial treatment systems |
|
--
Dewatering application |
Specification:
|
|
|
SPEED: 1750RPM (nominal) |
|
SOLIDS HANDLING: 2"Max |
|
CAPACITIES: Up to 405GPM, |
|
TOTAL HEADS: Up to 38ft. |
|
DISCHARGE: 3" NPT, Vertical |
|
AMBIENT TEMP: 104F (40C) Continuous
140F(60C) Intermittent |
|
Max. Start/Stop times per hour:15 |
|
VOLUTE: Cast Iron, ASTM A-48 Class 30.
|
|
MOTOR HOUSING: Cast Iron, ASTM
A-48 Class 30. |
|
SEAL PLATE: Cast Iron ASTM A-48
Class 30. |
|
IMPELLER: 2-Vane, Open, Cast Iron,
ASTM A-48 Class 30. Balanced for
smooth operation. |
|
SHAFT: Corrosion resistance
stainless steel, Threaded design. |
|
O-RING: BUNA-N, assures positive
sealing against oil leakage.
|
|
HARDWARE: 300 series stainless
steel. |
|
DUAL MECHANICAL SEALS: 300 S.S. metal
parts, BUNA-N elastomers. |
|
UPPER SEAL: Carbon (rotary) VS
Ceramic (stationary) |
|
LOWER SEAL: Silicon Carbide VS
Silicon Carbide. |
|
INSULATION: Class B |
|
CABLE: Water proof 30 ft. Cord
(Plug on 115V). |
|
ENTRY: Pressure grommet for
sealing and strain relief. |
|
MOTOR: Squirrel Cage Induction,
Single Phase, 4 Poles, Oil filled,
115V/60Hz, 1/2Hp~1-1/2Hp, |
|
Pump under 1 HP with built-in Thermal
Protector, with automatic reset.
Permanent Split Capacitor Type,
|
|
Three Phase: 230V/460V, 60Hz,
1-1/2HP-2HP |
|
OPTIONAL:
Piggy back ball
float switch
/
115v Only 28.00 /
230v Only 44.00 |
|
|
Model |
V. |
Motor Full
Load (Amps) |
Hp |
GPM at
Height (ft.) |
Shut Off
(ft.) |
Solids
(in.) |
Cord Size |
Price |
|
5 |
10 |
15 |
20 |
25 |
30 |
35 |
|
80WQ0.37 |
115/230 |
8.0/4.0 |
1/2 |
185 |
140 |
65 |
|
กก |
กก |
กก |
18 |
2 |
14/3 |
289.00 |
|
80WQ0.37 |
230/460 |
1.2/0.6 |
1/2 |
14/4 |
|
80WQ0.55 |
115/230 |
10/5.0 |
3/4 |
280 |
230 |
160 |
65 |
|
|
|
23 |
2 |
14/3 |
319.00 |
|
80WQ0.55 |
230/460 |
2.8/1.4 |
3/4 |
14/4 |
|
80WQ0.75 |
115/230 |
14/7.0 |
1 |
305 |
260 |
185 |
110 |
10 |
|
|
26 |
2 |
14/3 |
379.00 |
|
80WQ0.75 |
230/460 |
4.0/2.0 |
1 |
14/4 |
|
80WQ1.1 |
115/230 |
16/8.0 |
1-1/2 |
340 |
290 |
235 |
175 |
115 |
40 |
|
33 |
2 |
14/3 |
429.00 |
|
80WQ1.1 |
230/460 |
5.0/2.5 |
1-1/2 |
14/4 |
|
80WQ1.5 |
230/460 |
6.0/3.0 |
2 |
405 |
365 |
325 |
280 |
225 |
160 |
70 |
38 |
2 |
14/4 |
479.00 |
|
|
|
100WQ
Submersible Sewage Pump
Applications:
|
--- Non-clogging submersible
sewage pump |
|
--- For installation in small lift
stations, drainage system or raw water
application |
Made specifically for:
|
-- Home and farms |
|
-- Mobile home parks and motels |
|
-- School and hospital |
|
-- Municipal package systems |
|
-- Industrial treatment systems |
|
-- Dewatering application |
|
Specification:
|
|
|
SPEED: 1750RPM (nominal) |
|
SOLIDS HANDLING: 3"Max |
|
CAPACITIES: Up to 420GPM, |
|
TOTAL HEADS: Up to 51ft. |
|
DISCHARGE: 4" NPT, Vertical |
|
AMBIENT TEMP: 104F (40C) Continuous
140F(60C) Intermittent |
|
Max. Start/Stop times per hour:15 |
|
VOLUTE: Cast Iron, ASTM A-48 Class 30.
|
|
MOTOR HOUSING: Cast Iron, ASTM
A-48 Class 30. |
|
SEAL PLATE: Cast Iron ASTM A-48
Class 30. |
|
IMPELLER: 2-Vane, Open, Cast Iron,
ASTM A-48 Class 30. Balanced for
smooth operation. |
|
SHAFT: Corrosion resistance
stainless steel, Threaded design. |
|
O-RING: BUNA-N, assures positive
sealing against oil leakage.
|
|
HARDWARE: 300 series stainless
steel. |
|
DUAL MECHANICAL SEALS: 300 S.S. metal
parts, BUNA-N elastomers. |
|
UPPER SEAL: Carbon (rotary) VS
Ceramic (stationary) |
|
LOWER SEAL: Silicon Carbide VS
Silicon Carbide. |
|
INSULATION: Class B |
|
CABLE: Water proof 30 ft. Cord
(Bare Leads). |
|
ENTRY: Pressure grommet for
sealing and strain relief. |
|
BEARINGS: Upper and lower single row
ball bearings construction |
|
MOTOR: Squirrel Cage Induction,
Three Phase, 4 Poles, Air filled,
208-230V/460V, Oil probe and built-in
thermal Protector, with automatic reset. |
|
|
Model |
V. |
Motor Full Load
(Amps) |
Hp |
GPM at height (ft.) |
Shut Off (ft.) |
Solids (in.) |
Cord Size |
Price
|
|
5 |
10 |
15 |
| |
